Basic Configuration

A. Add tag=VLAN to your ovs-vsctl add-port command. For example, the following commands configure br0 with eth0 as a trunk port (the default) and tap0 as an ...

A. Add tag=VLAN to your ovs-vsctl add-port command. For example, the following commands configure br0 with eth0 as a trunk port (the default) and tap0 as an ...

2015年6月29日 — Trunk ports can be set in OVS using the ovs-vsctl set option This will created a network bond with interfaces eth0 and eth1 and will trunk ...

2023年5月22日 — Vlans. Setup trunk with vlan 10 + 20 plus tag untagged traffic to vlan 1 through the physical port: $ ovs-vsctl set port eno1 ...

2014年4月23日 — yes ! Explicitly enumerating the VLANs to be trunked ovs-vsctl set port eth0 vlan_mode=trunk trunk=0, ...

2017年2月15日 — trunk 类似交换机配置的trunk模式。trunk 端口传递指定vlan（通过trunks指定）的包。如果trunks为空，则所有的VLAN都可以通过，即通过trunk port ...

2018年5月29日 — $ ovs-vsctl add-port vswitch1 patch_to_vswitch0 ovs-vsctl: Error ... ovs-vsctl set port patch_to_vswitch1 VLAN_mode=trunk ovs-vsctl set port ...

2018年4月6日 — To configure trunk on Open vSwitch, we can use this command ###### on Open vSwitch 1 ###### / # ovs-vsctl set port eth5 trunks=10,20 ...

Make sure that the port is configured to trunk the VLAN or VLANs that you are using with OVS. Q: Outgoing VLAN-tagged traffic goes through OVS to my physical ...

Instead of using one cable and two ports per VLAN to connect a pair of switches, we configure a port on each switch as a VLAN “trunk port”. Packets sent and ...